1 of 4: Assembling Boxies
Assemble 1 unit a time. Do not add more units until the previous ones have been securely fastened.
1. Fasten Boxies horizontally
Do not over-tighten the screws to avoid breaking the surface.
1. Align the Boxies next to each other in a row.
2. Pass the female screw through the opening located in the center of the vertical wall.
3. Insert the male screw through the other side and fasten using 2 hex keys.
2. Fasten Boxies vertically
1. Align the Boxies one on top of another.
2. On the back, insert the big metal plate (4 holes) into the slot above the back screen.
3. Fasten the top using 2 metal screws using the hex key.
4. Fasten the bottom using 2 black screws using the hex key.
3. Fasten outermost sides
1. Locate the 2 small holes on the outermost sides.
2. Fasten the small metal plate (2 holes) using 2 metal screws.
4. Cover the unused holes (optional)
Use the adhesive round caps to cover the unused holes.
